RAZOR-E &
STEELY-E

RAZOR-E = for Disposable Blades
STEELY-E = for Steel Knives

 

Blades & SteelknivesSpecial offersContact us

offers great user benefit and gives superior comfort to the operator.The perfectly ergonomic arrangements of the control elements enable an effortless handling of the microtome. Section thickness can be adjusted between 0.5 µm – 60 µm and the automatic trimming in 3 steps: 1:10 µm, 2:20 µm, 3:30 µm. The powerful cutting motor drive with safety function ensures high section stability and precision.
Hand wheel lock conveniently integrated locking lever on the hand wheel.
Emergency shut down button
With the emergency shut down button the slicing process can be stopped immediately.
Specimen retraction function: On upward movement 80 µm

► Technical Specifications
Section thickness range: 0.5~60 μm
Section thickness setting
0.5 µm – 2 µm, 0.5 µm increments
2 µm – 10 µm, 1 µm increments
10 µm – 20 µm, 2 µm increments
20 µm – 60 µm, 5 µm increment
Specimen vertical stroke: 70 mm
Specimen horizontally stroke: 40 mm
Coarse advance: manually by hand wheel left side
Object orientation: X- and Y-axes 8°, Z-axes 360°
Object retraction: On upward movement 80 µm
Cutting Count: Integrated, with LCD-display/4 numbers
Automatic trimming   In 3 steps: 1:10 µm, 2:20 µm, 3:30 µm

Equipment

Knife holder basic unit
(Art.No. 102000)

Accepts various knife holders.

Standard knife holder “R”
(Art.No. 102100)

Accepts standard- and Tungsten Carbide knifes as well as blades knifeguard clearance angle adjustment knife height adjustment.

Knife holder “RS”
(Art.No. 102300)

Stable version for Tungsten carbide conventional steel knives with the central clamping plade providing optimal stability. The knife is stabilized exactly, where the highest cutting forces are applied. Full use of the knife length.

Knife holder G – glass knife (Art.No. 102400)

For semi-thin section technique with triangular glass, diamond and sapphire knives. Lateral adjustment with fine feed knob or unique rapid movement. Knife may be rotated ± 30° for alignment to specimen or trimming. Clearance angle adjustment.

Disposable blade holder 2511 A – low profile (Art.No. 122001)

Quick release clamping system for clamping blades. Adjustable tilt.

Clamping plate 2511 A – low profile (Art.No. 102211)

Clamping plate low profile to be inserted on disposable blade holder basic unit.

Disposable blade holder 2511 B – high profile (Art.No. 101560)

Quick release clamping system for clamping blades. Adjustable tilt.

Clamping plate 2511 B – high profile  (Art.No. 100005)

Clamping plate low profile to be inserted on disposable blade holder basic unit.

Adapte rigid
(Art.No. 103000)

For fixed object clamp.

Adapter orientable
(Art.No. 103100)

Orientable in X/Y-axes, table for exact specimen block orientation. To be used with Object orientation (clamping lever left and right).

Object orientation clamping lever left  (Art.No. 103200)

To accept objects clamps adjustable in X/Y-axes. To be used with Adapter orientable.

Object orientation clamping lever right (Art.No. 103250)

To accept objects clamps adjustable in X/Y-axes. To be used with Adapter orientable.

Standard object clamp
(Art.No. 103300)

With fixed upper jaw ensuring maximum stability. Maximum specimen size 50 x 50 mm. To be used with Adapter rigid or Adapter orientable.

Prism
(Art.No. 103320)

For fixation of round specimen. You can insert the prism in the Standard object clamp.

Insert for round specimen  (Art.No. 103330)

For easy clamping of round samples with defined diameter in conjunction with the Standard object clamp.

Ø 6 mm

(On request special sizes)

Insert for round specimen  (Art.No. 103340)

For easy clamping of round samples with defined diameter in conjunction with the Standard object clamp.

Ø 15 mm

(On request special sizes)

Insert for round specimen  (Art.No. 103350)

For easy clamping of round samples with defined diameter in conjunction with the Standard object clamp.

Ø 19 mm

(On request special sizes)

Insert for round specimen  (Art.No. 103360)

For easy clamping of round samples with defined diameter in conjunction with the Standard object clamp.

Ø 25 mm

(On request special sizes)

Foil clamp
(Art.No. 103390)

For clamping of thin material layers. Directly on the cylinder in connection with the rigid adapter or adapter orientable.

Universal cassette clamp
(Art.No. 103400)

Quick release clamping system for all types of commercially available cassettes. To be used with Adapter rigid or Adapter orientable or Clamping adapter.

Clamping adapter
(Art.No. 100023)

For clamping Standard Object Clamp into Universal-Cassette Clamp

Maxi cassette holder
(Art.No. 100058)

Quick release clamping system of cassette size 73 x 52 mm). Length-clamping of cassette to be used with Adapter rigid or Adapter orientable or Clamping adapter.

Section waste tray
(Art.No. 104200)

Removable tray to the simple dispose of the waste cuttings.

Dust cover
(Art.No. 105000)

For the protection from soiling after usage.

Set of tools
(Art.No. 104000)

For the assembly of Objectdetection and for readjustments on the knifeholding fixture.

Oil
(Art.No. 100072)

For the cleaning of guides and improvement  of the sliding properties.

CONTACT US:
MICROS St.Veit
Hunnenbrunn - Gewerbezone 5
9300 St. Veit/Glan, AUSTRIA
Tel:+43 4212 30901
Fax:+43 4212 30901 90
Mail:office@micros.at
MICROS Wien
Graf-Starhemberg-Gasse 14/1/5
A-1040 Wien, AUSTRIA
Mail:office@micros.at
SERVICES:
25 Jahre micros Austria
©micros Austria 2018